Exciting New Arrivals: Bradbury In-Stock Equipment Has New Additions

BIEGEMASTER XBEND DOUBLE FOLDER 21' x 16ga. MILD STEEL CAPACITY

• 6400mm – 21’ maximum length with 5 Frames
• Fully automatic gripper system (21 feet - 6 units)
• Automatic sheet loading table (21 feet)
• Taper back-gauge with Grippers for 1250mm throat (21 feet - 16ga - 6 stops)
• Two Station Bending with Grippers (bend 2 parts simultaneously with one operator)
• Servo Hydraulic package (0-145-0 deg in approximately 2 seconds)
• Double finger for narrow part bending
• 24'' Touchscreen Controller
• Slitter with rotated cutting direction right to left

BIEGEMASTER XBEND DOUBLE FOLDER 10' x 14ga. MILD STEEL CAPACITY

• 3100mm – 122” maximum length with 3 Frames
• Fully automatic gripper system with three (3) grippers and three (3) fingers – single motor back gauge, no tapering
• Material thickness adjustment
• High Speed Servo Hydraulic Package
• Slitter with left to right movement
• 18'' Touchscreen Controller

BRADBURY SINGLE BEND FOLDER 21' x 18ga. MILD STEEL CAPACITY

• 0.020” to 0.040” @ 65,000 PSI
• Beck Controller
• Hydraulic double acting cylinders
• Undercut jaw for a 145° maximum bend 
• Full-length backgauge with numerical control for positioning 
• Backgauge movement is performed by electric motor and gear reducer
• No slitter
  
  

BRADBURY RECUT AG PROFILE TOOLING

• 3.5" Arbor
• 48" Rollspace
• L6 Thru Hardened Tool Steel
• Recut and Chromed
• 14 Passes
• No Straightener Fixture
• No Spur Gears

BRADBURY 18GA. X 49” CUT-TO-LENGTH LINE WITH 12,000LB. COIL CAPACITY AND 14’ STACKER

Equipment List

• 12,000lb. Entry Coil Car
• 12,000lb. Uncoiler with Hydraulic Expansion and Hydraulic Payoff
• Roller Straightener – Two 5.00” Ø Pinch Rolls, Four 3.00” Ø Work Rolls
• Feeder (150 FPM), Film Applicator, and Mechanical Shear
• Drop Type Stacker – 14’ Capacity with fixed height receiving table with powered side traverse

Specifications

• Maximum Coil Weight – 12,000lbs.
• Coil Inside Diameter – 20” Nominal
• Maximum Coil Outside Diameter – 45”
• Coil Width – 24-49”
• Cut Length – 48-168”
• Mode of Operation - Centerline Justified, Feed-to-stop
• Incoming Power - 460V, 3 Phase, 60 Hertz
• Pneumatic Supply – 100 PSI clean and dry
• Material – Carbon Steel - Grade 33 (0.015-0.048”), Grade 50 (0.015-0.033”)
• Grade 80 (0.015-0.027”)